Pagina 248 - GC_Sensor_Vision_Safety_Measurement-ENA4

www.datalogic.com
UNI EN ISO9001
MODEL V SPOT ORDER N°
TL46-W-815 basic vertical 954601000
TL46-W-815L basic horizontal 954601010
TL46-WL-815 standard vertical 954601020
TL46-WL-815L standard horizontal 954601030
TL46-WLF-815 enhanced vertical 954601040
TL46-WLF-815L enhanced horizontal 954601050
MODEL DESCRIPTION Order No.
CS-A1-03-G-03 axial M12 NO-NC 5-poles 3 m 95ACC2110
CS-A1-03-G-05 axial M12 NO-NC 5-poles 5 m 95ACC2120
CS-A1-03-G-10 axial M12 NO-NC 5-poles 10 m 95ACC2140
Lens No.9 glass glass lens with 9 mm focus 95ACC2670
Lens No.9 PMMA plastic lens with 9 mm focus 95ACC2540
Lens Hi-Res glass additional focussing glass lens (*) 95ACC1050
Lens No.18 glass glass lens with 18 mm focus 95ACC2680
Lens No.22 glass glass lens with 22 mm focus 95ACC1100
Lens No.28 glass glass lens with 28 mm focus 890000194
Lens No.40 glass glass lens with 40 mm focus 95ACC2740
accessory selection MODEL SELECTION
reading diagram
Standard 9 mm lens
(1.5 x 5 mm spot on focal point)
Accessory 28 mm lens
(2 x 9 mm spot on focal point)
Accessory 40 mm lens
(2.5 x 11 mm spot on focal point)
Accessory 18 mm lens
(2 x 7 mm spot on focal point)
Accessory 22 mm lens
(2 x 8 mm spot on focal point)
mm mm
mm mm
mm
* focussing lens to screw between the sensor and normal 9 mm lens to
reduce the light spot dimension and increase resolution
Please refer also to Sensor Accessories
The company endeavours to continuously improve and renew its products; for this reason the technical data and contents of this catalogue may undergo
variations without prior notice. For correct installation and use, the company can guarantee only the data indicated in the instruction manual supplied with the
products.