Pagina 285 - GC_Sensor_Vision_Safety_Measurement-ENA4

PSCU SERIES
The control units of the PSCU series
can be used to supply low voltage
photoelectric sensors, as well as
inductive or capacitive proximity,
with the possibility to process
the outputs with logic and timing
functions.
The input can be configured for
1 or 2 sensors, with NPN or PNP,
with relay, or with 0-10 Vdc analog
output, which can be controlled with
different logic functions: NOT, AND,
OR, NAND, NOR.
The signal resulting from the logic
operations drives the controller
output, which can be processed
with timing functions: ON and/or
OFF delay, monostable or bistable
commutation.
On the PSCU control panel,
protected by a transparent cover,
are present the LEDs for power,
inputs and output status indication,
as well as the trimmer for the inputs
sensitivity and the timer adjustment.
The input selection, the logic and
the timing functions are easily
configured using the dip-switches
on the controller side, where the
extractable terminal blocks for the
connection are also present.
The PSCU series is suitable for DIN
rail mounting and is available with
a 100-240 Vac or 24 Vac/Vdc power
supply input and relay SPDT or
transistor NO-NC controller output.
highlightS
• 100-240 Vac or 24 Vac/Vdc power
supply
• Single or double input for NPN/PNP,
relay or 0-10V analogue sensors
• Boolean logic functions: NOT, AND,
OR, NAND, NOR
• Timing functions: ON and/or OFF
delay, monostable, bistable
APPLICATIONS
SENSORs
control units
accessories
Beverage & Bottling
Automatic warehouse
Packaging lines
Electronics