Pagina 32 - GC_Sensor_Vision_Safety_Measurement-ENA4
Versione HTML di base
Power supply:
10 ... 30 Vdc (d.c. vers.),
reverse polarity protection
15 ... 264 Vac (a.c. vers.)
Consumption:
30 mA max. (d.c. vers.)
10 mA max. (a.c. vers.)
Light emission:
infrared LED 880 nm
red LED 660 nm (B, E1 vers.)
Diffuse proximity operating distance:
1 ... 10 cm (C10 vers.), 1 ... 8 cm (C8 vers.)
1 ... 35 cm (C35 vers.), 1 ... 30 cm (C30 vers.)
1 ... 60 cm (C60 vers.)
Fixed focus operating distance:
15 mm with 1 mm spot (D15 vers.)
50 mm with 2 mm spot (D50 vers.)
Retroreflex operating distance:
0.1 ... 4 m (on R2)
Polarised retroreflex operating distance:
0.1 ... 3 m (on R2)
Retroreflex for transparents op. distance:
0.1 ... 0.8 m (on R2)
Through beam operating distance:
0 ... 12 m (F/G12 vers.), 0 ... 8 cm (F/G8 vers.)
Operating distance with fibre-optics:
22 mm proximity (with OF-18-ST)
85 mm through beam (with OF-19-ST)
refer to OF series for other fibres
Setting:
sensitivity trimmer
(A4, C8, C10, D15, D50, G vers. excluded)
Indicators:
red OUTPUT LED
green STABILITY LED (d.c. vers.)
red POWER LED (G vers.)
Output type:
NPN or PNP configurable (d.c. vers.)
SCR + bridge rectifier (a.c. vers.)
Saturation voltage:
2.5 V max. (vers. d.c.)
Output current:
150 mA max.(vers. d.c.), short-circuit prot.
100 mA max.(vers. a.c.)
Response time:
500 µs (D50 vers. )
1 ms max.
2 ms (F vers. in d.c.)
20 ms max. (a.c. vers.)
Switching frequency:
1KHz (D50 vers.)
500 Hz max.
250 Hz max. (F vers. in d.c.)
25 Hz max. (a.c. vers.)
Operating mode:
dark/light (configurable in 4 wires d.c. vers.)
Auxiliary functions:
‘test +’ and ‘test -’ inputs (G vers. in d.c.)
Connection:
4-pole M12 connector or 2 m Ø 5 mm cable
Electrical protection:
class 1 (a.c. vers.); class 2 (d.c. vers.)
Mechanical protection:
IP67
Housing material:
ABS
Lens material:
PMMA plastic
Weight:
25 g max. (connector vers.); 100 g max. (cable vers.)
Operating temperature:
-25 ... +55°C
Storage temperature:
-25 ... +70°C
Reference standard:
EN 60947-5-2
Certifications:
( vers.d.c.)
TECHNICAL DATA
DETECTION DIAGRAMS
Grey R18%
White R90%
Grey R18% White R90%
Grey R18% White R90%
R2
R5
R2
R5
R2
R5
S5-x-C10-x
S5-x-C35-x
S5-x-C60-x
S5-x-A4-x
S5-x-B3-x
S5-x-T1-x
S5-x-F/G-x
S5-5-D50-92
The operating distances indicate the detection distance with excess gain 2.
The detection diagrams indicate the typical operating distance
with excess gain 1.
Grey R18%
White R90%
