Pagina 358 - GC_Sensor_Vision_Safety_Measurement-ENA4

www.datalogic.com
DATAVS1 CONFIGURATOR
The configuration of DATAVS1 sensors is obtained exclusively
via VSC unit. No PC is necessary and thus sensor setting is easy
and quick. Once the configuration has been completed, the VSC
display can be used to visualise inspection results in real time or
to configure a new sensor.
The interface available on the configurator, composed of 8
signalling LEDs and 8 push-buttons, allows the operator to
quickly and intuitively set the sensor functioning parameters.
Push-button label Main functions
Status Go to next configuration step
Teach Setting memorisation
Acquisition of a new reference image
Set Confirmation of option selected
Confirmation of parameter value
Esc Exit without saving
Return to previous panel
Return to previous configuration step
Arrows Change of option selected
Movement/resizing of ROI
Parameter change
In the first configuration step, the user has to set the sensor
parameters in order to obtain a good image quality in terms of
focus, brightness and contrast. The control type and the part to
inspect have to be then defined.
The second configuration step consists in setting the functioning
parameters of the control previously selected and the acceptance
thresholds.
The third step consists in the control of the correct inspection
functioning and the saving on the sensor memory. Once completed,
the sensor can operate in a stand-alone mode.
Step 1:
Image adjustment
and control definition
Step 2:
Parameter setting
Step 3:
Inspection check and
memorisation
PUSH-BUTTONS