www.datalogic.com
INDICATORS AND SETTING (trimmer versions)
Two different models
are available:
high resolution (AS1-HR) or
standard resolution (AS1-SR).
In
the first case the light array has 16
beams, while in the second case the
beams are reduced to 6. In the AS1-
HR model, the selection inputs of the
SCAN MODE, can configure 4 different
crossed-beam scanning modes. These
different modes allow to vary the
detection performances, in particular the
resolution can be increased to 0.2mm
thickness, or the response time up to
less than 3ms.
DIMENSIONS
CONNECTIONS
FIXING BRACKET
mm
Emitter is equiped with a manual
regulation which lets the user change
the emission power by means of a
screwdriver.
The emission power reduction can be
particularlly useful to lower passive
reflections when maximum operating
distance it is not required.
RECEIVER (RX)
RECEIVER (RX)
TRIMMER VERSIONS
EMITTER (TX)
EMITTER (TX)
1 = brown = +24Vdc
2 = white = SEL_RX (only AS1-HR)
3 = blue
= 0 V
4 = black = SWITCHING OUTPUT
5 = grey
= SYNC
1 = brown = +24Vdc
2 = white = SEL_RX (only AS1-HR)
3 = blue
= 0 V
4 = black = SWITCHING OUTPUT
5 = grey
= SYNC
1 = brown = +24Vdc
2 = white = SEL_RX (only AS1-HR)
3 = blue
= 0 V
4 = black = SYNC
1 = brown = +24Vdc
2 = white = SEL_TX1 (only AS1-HR)
3 = blue
= 0 V
4 = black = SEL_TX2 (only AS1-HR)
mm
1...,252,253,254,255,256,257,258,259,260,261 263,264,265,266,267,268,269,270,271,272,...572