technical data
Power supply:
24 Vdc ± 15 %
Consumption on emitter unit:
100 mA max.
Consumption on receiver unit:
100 mA max. without load
Outputs:
1 PNP output; max. 10 kW load
1 analog output; 0 - 10 V (D Vmax. 5%)
Load current on PNP output:
100 mA; short circuit protection
Saturation voltage on PNP output:
1 V a T=25°C
Response time:
refer to selection table
Emission type:
infrared 880 nm
Resolution with crossed beams
minimum object detectable:
DS3-SD: 0.5 mm
DS3-LD: 0.8 mm
Resolution with parallel beams
minimum object detectable:
6 mm
Relative measurement precision
(parallel beams):
± 6 mm
Absolute measurement precision
(parallel beams):
± 3 mm
Dimensional difference between equal-
ly detected objects in the absolute
teach-in mode:
± 6 mm
Dimensional difference between equal-
ly detected objects in the absolute
teach-in mode:
∆ = 12 mm
Operating distance:
0.2 - 0.6 m (SD vers. parallel beams)
0.3 - 0.6 m (SD vers. crossed beams)
0.6 - 1.5 m (LD vers.)
Receiver indicators:
green POWER ON LED
orange OUT LED
red FAILURE/ERROR LED
Emitter indicators:
green POWER ON LED
Operating temperature:
- 10 … + 55 °C
Storage temperature:
- 25 … + 70 °C
Humidity:
15…95 % (uncondensed)
Electrical protection:
class 1
Mechanical protection:
IP 65 (EN 60529)
Vibration resistance:
0.7 mm width,
10 … 55 Hz amplitude,
10 sweep for X, Y, Z axis;
1 octave/min., (EN 60068-2-6)
Shock resistance:
16 ms (about 10 G) 1.000
shock for axis (EN 60068-2-29)
Housing material:
painted aluminium (shiny black RAL9005)
Optics material:
PMMA
Connections:
M12-4 pole connector for TX
M12-8 pole connector for RX
Weight:
DS3-015: 310 g. per unit
DS3-030: 530 g. per unit
DS3-045: 700 g. per unit
DS3-060: 980 g. per unit
FUNCTIONING MODE
High resolution detection of small or
transparent objects
Detection and measurement of an
object’s height or profile
Detection mode (teach-in)
Note:
different operating modes can be selected: absolute
or relative measurement respect to a reference by means
of internal dip-switches and absolute or relative
detection respect to a reference by means of internal dip-
switches and SET button
1...,315,316,317,318,319,320,321,322,323,324 326,327,328,329,330,331,332,333,334,335,...572