Pagina 327 - GC_Sensor_Vision_Safety_Measurement-ENA4

s65-z SERIES
The S65-Z series offers a retroreflex
line sensor for accurate measurements
of the centre or edge position and
width of objects. The detection is
made on a reflecting tape, supplied
with the sensor, positioned behind
the object, with a 150 mm maximum
measurement field width and a 200
mm operating distance. The 4-20 mA
analogue output is proportional to the
measurement, while the digital output,
PNP or NPN according to the model,
is activated when the measured value
is included inside the interval fixed by
the operator via teach-in. An alarm
signal is activated when the luminous
intensity received is weak. The setting
is accomplished through three push-
buttons present on the control panel,
together with the output status LED, two
LEDs signalling the operating mode, an
alarm LED and a 4-digit display for the
visualisation of the measurement and
sensor configuration messages. Models
with the RS485 serial interface offer the
remote setting of all the programmable
functions as well as the transmission of
the measurements to an industrial PC
are available.
measurement
Light Arrays
applications highlights
• Line sensors with RS485 serial
interface
• PNP or NPN digital output and 4 - 20
mA analogue output
• Teach-in of the measurement limit
values for digital output activation
• 3 setting push-buttons and a 4-digit
display
Automatic machines Pharmaceuticals
Packaging lines
MEASUREMENT