Pagina 465 - GC_Sensor_Vision_Safety_Measurement-ENA4

Operation functions and parameters configuration can be performed in two different ways:
Basic Configuration Mode (BCM):
Let the user select among basic functions / basic parameters with the help of push buttons and led user interface ( available on both
SG2-M and SG4-E )
Advanced Configuration Mode (ACM):
Let the user select among advanced functions / advanced parameters with the help of a PC Software GUI interface (available only
for SG4-E )
FUNCTIONS
BCM
A user interface of 8 leds and 3 protected push buttons lets the user operate basic configuration.
The user must use the provided special tool (see below) to activate push buttons thus accidental access to safety configuration is
avoided.
Basic configuration steps:
In the right side of user control panel (on both units of the light curtain) a setting interface composed by 3 push buttons is present; the
purpose of the interface is to let the user set light curtain locally and without use of PC graphic user interface.
Setting interface is composed by a CONFIRM push button used to enter in BCM and to confirm the selected configuration, a SELECT
push button used to roll by different functions and an ENABLE push button to activate/deactivate the current function.
Please refer to the quick installation guide for necessary BCM configuration steps.
When an Advanced Configuration is already set on ESPE (configuration by SG4-GUI PC User Interface) ACM LED on RX
unit’s ON. Then a button pressure on Step 2 causes ESPE configuration failure lockout to prevent unauthorized advanced
configuration changes.
SG2-M RX